Browse our collection of papers in
Engineering Dissertations
C/EN/55. Dissertation. The differences between high strength concrete (HSC) and normal strength concrete (NSC) columns under fire
- WORDS:
- 8950
- DATE:
- 2012
- PRICE:
- 89.99 GBP
This dissertation aims to examine the differences between high strength concrete (HSC) and normal strength concrete (NSC) columns under fire. The review of literature discusses the behaviour of HSC as well as the factors that affect its performance. The research methodology is detailed, and the paper looks at the Eurocode-2 and presents a variety of case studies. The results from the research are detailed and discussed before conclusions are made.
KEYWORDS: Dissertation, high strength concrete, HSC, normal strength concrete, NSC, fire, Eurocode-2,
C/C/366. Dissertation. Evaluation of VDI Platforms and their Security Issues
- WORDS:
- 11700
- DATE:
- 2012
- PRICE:
- 119.99 GBP
The dissertation examines current platforms used for Virtual Desktop Infrastructures (VDI) providing a review of literature on the benefits of VDI, the factors that need to be considered before adopting VDI, the stages of VDI implementation, VDI advantages and disadvantages, the issues of VDI security, the interaction of VDI components, etc. A project of VDI installation and configuration is developed and detailed describing the required hardware and software technology. Results obtained from the test group and the project sponsor are evaluated.
KEYWORDS: Dissertation, VDI Platforms, Security Issues, Virtual Desktop Infrastructures,
C/EN/54. Dissertation. An examination of the design challenges of blowout preventers
- WORDS:
- 9900
- DATE:
- 2012
- PRICE:
- 99.99 GBP
This dissertation aims to evaluate the issues that arise when designing a blowout preventer (BOP) in the Caspian sea. The review of literature discusses the way in which BOPs function as well as different types of BOPS. The design challenges are discussed, and the study also looks at safety and environmental considerations. Case studies regarding fatal accidents and blow outs are evaluated before conclusions and recommendations are made.
KEYWORDS: Dissertation, blowout preventers, BOP, Caspian sea!,
C/EN/53. Dissertation. Value Engineering and Value Management in Saudi Arabia
- WORDS:
- 12450
- DATE:
- 2012
- PRICE:
- 129.99 GBP
This dissertation discusses the need for Value Engineering and Value Management in Saudi Arabia. The objectives are to spot the foremost issues in the management of operations and maintenance in Saudi Arabia and to discuss how and why value engineering methodologies can be employed in order to find a best solution for these problems. The study details the problem statement, and provides information on the Saudi Arabian climate, economy, codes and standards. The review of literature discusses a range of subjects regarding value engineering and value management, and aims to assess the min differences between the two. Value engineering in Saudi Arabia is discussed, and the study then details all aspects of the research methodology. The findings from the collected research are detailed and analysed, and the dissertation then provides recommendations.
KEYWORDS: Dissertation, value engineering, value management, Saudi Arabia!,
C/EN/52. Dissertation + Proposal. Value Engineering and Value Management in Saudi Arabia
- WORDS:
- 15200
- DATE:
- 2012
- PRICE:
- 159.99 GBP
This dissertation discusses the need for Value Engineering and Value Management in Saudi Arabia. The objectives are to spot the foremost issues in the management of operations and maintenance in Saudi Arabia and to discuss how and why value engineering methodologies can be employed in order to find a best solution for these problems. The study details the problem statement, and provides information on the Saudi Arabian climate, economy, codes and standards. The review of literature discusses a range of subjects regarding value engineering and value management, and aims to assess the min differences between the two. Value engineering in Saudi Arabia is discussed, and the study then details all aspects of the research methodology. The findings from the collected research are detailed and analysed, and the dissertation then provides recommendations. This paper contains 12450 words dissertation and 2750 words proposal.
KEYWORDS: Dissertation, value engineering, value management, Saudi Arabia, proposal,
C/EN/51. Proposal. Value Engineering in Saudi Arabia
- WORDS:
- 2750
- DATE:
- 2012
- PRICE:
- 29.99 GBP
The paper proposes to addresses Saudi Arabian approaches to value management in building and engineering projects implemented within the public sector. The aim of the research is formulated, literature is reviewed on the concepts of sustainable construction and value engineering, construction features of the Saudi public sector, etc. The methodology and sources of the research are described, anticipated risks are considered, the time scale of work is indicated.
KEYWORDS: Proposal, Value Engineering, Saudi Arabia, building, construction,
C/B/4314. Dissertation. Skill Shortages in the Manufacturing and Engineering sectors in the UK
- WORDS:
- 19450
- DATE:
- 2011
- PRICE:
- 199.99 GBP
This dissertation examines the skills that are lacking in the UK manufacturing and engineering industries. The study aims to find out what skills are essential for the UK manufacturing and engineering industry, to explore which of the skills are lacking in the context of the UK manufacturing and engineering industry, to determine what measures may be taken at the organisational level and the governmental level in order to cope with this problem, and to provide valid recommendations for the HR departments on how the problem may be effectively solved. The review of literature examines topics including skill-related challenges for HRM, the skill gap, and the legal aspects relating to the skills gap. The methodology used is examined and outlined, and the study then analyses all of the data collected. Conclusions are made regarding recommendations.
KEYWORDS: Dissertation, manufacturing, engineering, HR, Skill gap, skills!,
C/EN/44. Dissertation Outline. Design modeling and simulation of robot arm using MOTOMAN
- WORDS:
- 520
- DATE:
- 2011
- PRICE:
- 9.99 GBP
The paper presents an outline of the dissertation aimed to design and simulate a robot arm using MOTOMAN for performing everyday tasks in the ways similar to a human arm. The question of the dissertation is formulated, areas of the literature review are defined, research methodology is described. The paper has no references.
KEYWORDS: Dissertation Outline, Design modeling, simulation of robot arm, MOTOMAN,
S/EN/50. Dissertation. Harmonic Mitigation and Reactive Power Compensation with Shunt Active Power Filter under Ideal Mains Voltage
- WORDS:
- 7950
- DATE:
- 2010
- PRICE:
- 79.99 GBP
This dissertation focuses on active power filters, namely the Three-Phase Three-Wire Shunt Active Power Filter. The paper aims to perform an in-depth investigation on the performance of the filter and examines whether it can be utilized to increase the power quality of distribution systems. The paper begins by discussing the main sources of harmonic pollution in a power distribution. The study then examines the research discussing topics likes shunt, hybrid and series active power filters. This is followed by an analysis of three phase shunt active power filters, and this section discusses topics like system configuration, interface reactors, and hysteresis control techniques. The paper then uses the MATLAB environment, SIMULINK, andrnSimpowerSystems Blockset toolboxes to carry out the proposed three-phase three-wire shunt active power filter. The paper then discusses all of the findings in great detail.
KEYWORDS: Dissertation, active power filters, Three-Phase Three-Wire Shunt Active Power Filter, distribution systems, harmonic pollution, shunt series active power filters, hybrid active power filters, series active power filters, interface reactors, hysteresis control techniques, MATLAB environment, SIMULINK, SimpowerSystems Blockset toolboxes,
C/EN/37. Dissertation. The use of bamboo as reinforcement in concrete structures
- WORDS:
- 8000
- DATE:
- 2010
- PRICE:
- 89.99 GBP
This dissertation examines the use of bamboo as reinforcement in concrete structures. The paper aims to evaluate whether the construction industry can successfully replace steel reinforcement material with bamboo. The introduction discusses bamboo as an engineering material, presents a detailed plan of the dissertation. The project uses two tests to collect the data, these are tensile testing of bamboo materials and four point bending tests of bamboo reinforced concrete beams. The review of literature focuses on a wide variety of topics relate to bamboo as a reinforcement material. The dissertation that examines all of the literature and the results from the tests to assess whether it is feasible for this material to be used as a potential reinforcement in concrete structures.
KEYWORDS: Dissertation, bamboo, reinforcement, concrete structures, construction industry, engineering material, tensile testing, four point bending tests!,
C/EN/28. Proposal. Use of Bamboo as reinforcement in concrete structures
- WORDS:
- 800
- DATE:
- 2010
- PRICE:
- 9.99 GBP
The paper proposes to examine the use of bamboo in concrete structures as a substitute to steel in the construction industry. The features of bamboo as an engineering material are described, the aims and objectives of the dissertation are formulated, the methods of the research are defined, the structure and time schedule of the work are outlined.
KEYWORDS: Proposal, concrete, bamboo, tensile strength, construction industry, engineering material,
C/EN/26. Dissertation. Design and Analysis of actuated valves for IC engines
- WORDS:
- 7300
- DATE:
- 2009
- PRICE:
- 79.99 GBP
The dissertation reports on the design and mathematical modelling of a hydraulically actuated valve system (HAVS) and an electrically actuated valve system (EAVS) for an Internal Combustion (IC) Engine. Literature is reviewed on valve train configurations, actuated valve trains, the parameters of the valve system, etc. Conceptual and control designs for HAVS and EAVS are described including MATLAB SIMULINK model. A poster and a 20-slide presentation of the study are supplied in separate files.
KEYWORDS: Dissertation, Engineering, Control Systems, IC Engines, Internal Combustion, Valves,
C/E/378. Proposal. Feasibility Analysis of Building Zero Carbon Homes
- WORDS:
- 900
- DATE:
- 2009
- PRICE:
- 9.99 GBP
The paper offers a research proposal based on a feasibility study of the zero carbon homes in terms of sustainability, technical ability, cost analysis, and consumer demand. Literature is reviewed on the environmental issues of urbanisation, Sustainability in the construction industry, etc. The methods of the research are outlined, preliminary findings are discussed.
KEYWORDS: Proposal, zero carbon homes, sustainability, construction, housing,
C/OM/114. Proposal. Implementation of RFID in Supply Chain Industries
- WORDS:
- 2800
- DATE:
- 2008
- PRICE:
- 29.99 GBP
The paper proposes research into the implementation of Radio frequency identification devices (RFID) in the Lenovo supply chain industry based in China. The description of the RFID systems is given, the approaches to the study of the RFID benefits in supply chain industry are outlined, research aims and objectives are formulated, a review of related academic literature and legislation is presented, research methodology is described, the timeline for the project is indicated.
KEYWORDS: Proposal, Radio frequency identification devices, RFID, supply chain, Lenovo,
S/EN/34. Dissertation. Computationally modelling the flow through air filters
- WORDS:
- 11500
- DATE:
- 2007
- PRICE:
- 119.99 GBP
The dissertation presents Computational Fluid Dynamic (CFD) analysis of two automotive air filters, a standard pleated-paper filter, and a Pipercross conical-shaped foam filter. Experiments are conducted to determine the coefficients of permeabilty (?) and inertia (C2), the porous characteristics of the filters are compared, 3D geometrically accurate CFD simulations of both air filters are completed, differences between the static pressure drops and velocity magnitudes through the filters are identified. Literature is reviewed on the theory of porous media and air flows. The methods of conducting airflow and porosity experiments are described. Conclusions are made about the validity of CFD analysis and modelling suggesting recommendations for further research in the area.
KEYWORDS: Dissertation, air filter, Computational Fluid Dynamic analysis, CFD, porous media,
E/C/22. Dissertation. MODELLING ACTIVATED SLUDGE TREATMENT PROCESS USING NEURAL NETWORKS
- WORDS:
- 9500
- DATE:
- 2006
- PRICE:
- 99.99 GBP
The dissertation investigates the value of neural networks in the dynamic modelling of wastewater treatment focusing on the problem of the activated sludge and reporting on the development of a computer program capable of monitoring the process. Information is provided about the stages of the project lifecycle, the history of the neural network development and applications, the analysis of the models and their components, etc. Conclusions are made about the advanced methods of sludge treatment via the neural network model, future areas of related research are outlined.
KEYWORDS: Dissertation, activated sludge, neural networks, wastewater,
P/EN/30. Multiple design parameters and the yield stress
- WORDS:
- 8000
- DATE:
- 2006
- PRICE:
- 89.99 GBP
The paper examines the relationship between the room temperature yield pressure of InxGa1-xAs superlattices measured by nanoindentation and the volume averaged strain modulation. The dependence of the yield stress on multiple design parameters is studied indicating the simultaneous onset of plastic deformation across a finite volume. Conclusions are made about the relationship which exists with yield decreasing in response to increased strain modulation.
KEYWORDS: Multiple design, yield stress,
P/EN/33. Dissertation. New algorithm for cooling schedules in annealing process
- WORDS:
- 9000
- DATE:
- 2006
- PRICE:
- 99.99 GBP
The dissertation investigates the annealing process focusing on the cooling schedules that can be used in the process for better results. The review of literature touches upon the problems of scheduling, simulated annealing (SA), the traditional and the new algorithms of the SA process, etc. The algorithm for SA optimization is tested. Conclusions are made about the performance of logarithmic and exponential cooling schedules.
KEYWORDS: Dissertation, cooling schedules, annealing process,
Subject Catalogue
- Dissertations and Proposals
- Analysis of Companies
- Analysis of Industries
- Architecture, Design and Technology
- Computing and Mathematics
- E-Commerce and E-Business
- Economics
- Education
- Engineering
- Fashion and Culture
- Finance and Accounting
- General Business
- History
- Hospitality and Tourism
- Human Resource Management
- International Relations
- Law
- Literature, Language and Theatre Studies
- Management and Organisational Behaviour
- Marketing
- Media, Music and Art
- Operations Management
- Philosophy
- Politics
- Psychology
- Science, Medicine and Nursing
- Sociology
GET OUR GooGLE TOOLBAR BUTTON
BOOK MARK US
WHAT OTHERS HAVE SAID
Thank you for your service. I'm planning to do my PhD on CRM - your papers are more useful for me to get an idea.Josephine
